FAQ’s

What is your lead time?

Our current lead time for nearby areas is 3-4 weeks. Email us to check the lead time for your area.

Is ground prep included?

We ask that your spot is leveled and ready when we get there. Most folks use sand, decomposed granite, mulch, or pea gravel to create a smooth and level pad. We have also set the tanks are concrete pads, grass, pavers, and reinforced decks. It’s important that your pad is level and smooth. If you’re wanting someone to do this service for you, we may be able to get you connected with a landscaper in your area.

What all is included?

Your pool comes with a Hastings black label stock tank. We will fully install a Waterway TWM 30 sand filter. This will include full inlet/outlet assemblies, plunger valves, and an external pool timer. We fill the sand reservoir with antimicrobial recycled glass media. If your set up requires a GFCI adapter, we will include one.

How deep are they?

All galvanized stock tanks are about 2 ft deep. The poly tanks are a bit deeper 28 inches deep. Many people wonder if the stock tank will be deep enough

Do you deliver to my area?

We’ll deliver all over the beautiful state of Texas! We include free delivery for up to 50 miles from Jonestown, TX (this includes Austin, Cedar Park, Leander, Round Rock, Pflugerville, Marble Falls, Burnet). For miles beyond 50, we charge $2/mile. Send us an email with your zip code, and we’ll be happy to give you a delivery quote.

How do I keep the water clean?

Your sand filter works to keep your water as clean as possible. We fill the sand filter with recycled glass media. This media is cleaned by performing a backwash function. This is a 1 minute process that will keep your filter media nice and clean. We backwash our pool once every 2-4 weeks or as needed.

You’ll also want to choose a treatment chemical. A lot of stock tank pool owners use 1” chlorine tablets and a floating dispenser. We choose to treat our stock tank pool with concentrated Hydrogen Peroxide. It’s gentle on our son’s sensitive skin, and we can reuse it on our plants.

In addition to treating your water, we recommend you purchase a cover for your stock tank pool. This will keep leaves and sediment from falling into your pool. A leaf net can also be very useful for scooping out debris.

Do you sell covers?

We don’t sell covers, but we have some great options to suggest! Once we get your order, we’ll send you a document that goes over how to prepare for install day. We link several cover options in that document.

Can you turn it into a hot tub?

We can! We offer the Camplux outdoor propane water heater as a heating solution. We usually say that if a hot tub during the cold months is your priority, consider going with a 6, 7, or 8 foot tank. The 9 and 10 foot tanks can get up to hot tub temperatures, but it will take a considerable amount time and propane – especially when its cold outside.

Do you build decks?

We don’t build any decks, but we have some amazing builder contacts that we love to share. If you know of an amazing deck builder in your area, we’d love to add their contact information to our list!

Doesn’t the tank/water get hot?

The key to keeping your stock tank pool cool in the summer is SHADE. In fact, many customers report that their pool stays quite chilly in the shade, even when its scorching outside. We suggest choosing a sunny spot and using an umbrella or shade sail to shade the area if needed.

Will the tank rust?

Galvanized metal does eventually rust, but it usually takes years for this to occur. The number one cause of early rust in a stock tank pool is over treating the water. Chlorine and other pool chemicals tend to eat away at the galvanized coating which leads to rust. It’s important to keep any pool chemical at minimal concentration so that galvanized coating stays intact. If you’re feeling super concerned about possible rust, the poly tank is a great alternative!

Do you paint them?

We do not offer any painting services at this time, but you can do it! Just know that galvanized metal can be tricky to paint. If you plan to paint your tank, reach out and we’ll share some tips and tricks that we’ve learned.

Should I paint the inside?

We suggest enjoying the galvanized metal for as long as possible. Galvanized coatings make it very hard for any paint to adhere, and chipping paint in the pool is a nightmare. Most people agree that an epoxy coating is needed to paint the inside of the stock tank. We have experimented with Pond Armor epoxy liner, and we’re happy to share all of the application tips and tricks that we learned. We think it’s the perfect solution for a tank that has developed some corrosion!

Can I use a salt water system?

We don’t suggest or have any experience using salt water systems for stock tank pools. Salt water is corrosive to the metal and could lead to quick rust.

Have another question? Let’s chat!